Distributed fibre optic sensors for crack monitoring in reinforced concrete structures
Strain and crack width measurements are primary concerns for health monitoring and damage assessment of large concrete structures in civil engineering. Indeed, the effective detection of damage, its localisation and to certain extent its quantification are essential components to establish an optimised maintenance schedule that may lead to a minimum life-cycle cost. For damage detection especially in the case of large concrete structures, distributed fibre optic sensing techniques is a promising alternative to usual visual inspection which is time consuming, expensive and low reliable. Moreover, fibre optic sensors are small dimensions, low sensitivity to electromagnetic perturbation and they are easy of installation.
For over a decade, many works on the development and the application of optic fibre sensing techniques for Structural Health Monitoring (SHM) have been carried out and significant progresses have been made in the recent years. However, some technological challenges must still overcome. Indeed, the reliability of fibre optic measurements and the mechanical durability of fibre optic sensors for long-term monitoring continues to raise interrogations. Besides the issues of spatial resolution which can affect significantly measurement results especially when the sensing length of the fibre optic sensor is shorter than the spatial resolution, the slippage between core fibre (which is the sensing element) and coating materials influences also the accuracy of measurements.
Seveval packages and methods of installation of fibre optic sensor will be tested in order to improve the confidence in strain and crack width. In addition for practical purposes, the fibre optic sensor location will be optimised in accordance to the need of structure engineers (in relation to WP3) and the issue of cross-sensitivity between strain and temperature will be addressed. The experimental work will be carried out on representative samples that can reproduce actual wind turbine foundation and bridges. Measurements will be carried out in a large scale climatic chamber to control and henceforth take into account the influence of temperature. The in situ implementation will be performed on reference structures provided by the stakeholders involved in the project.
From 01.11.2016 to 31.10.2019
PhD director: Dr Dominique Leduc (GeM-University of Nantes)
The members of the thesis committee are:
- Prof Joan Ramon Casas, UPC-BarcelonaTech, Spain (reviewer)
- Prof. Branko Glisic, Princeton University, USA (reviewer)
- Prof. Eugen Brühwiler, EPFL, Switzerland
- Prof. Emmanuel Marin, Jean Monet University, France
- Dr Dominique Leduc, University of Nantes (PhD director)
- Dr Odile Abraham, Université Gustave Eiffel - Ifsttar, France (PhD co-director)
- Dr Xavier Chapeleau, Université Gustave Eiffel - Ifsttar, France (supervisor)
- Jean-Marie Henault, EDF, France (invited member)
The defence held on Tuesday 26 November 2019 at 10:30 at Ifsttar Nantes, France.
Cracking is a primary concerns for health monitoring and damage assessment of large concrete structures in civil engineering. However, it is generaly difficult to locate cracks. Recent publications have shown that embedded fibre-optic sensors can be used for cracking detection and localisation. However, some technological issues must still be resolved and in particularly the quantitative interpretation of measured strain at cracks. It is linked to the strain transfer function of the fiber optic.
Main aim is to improve the understanding of strain transfer between a host material in concrete and an embedded fibre optic for more accurate strain and crack width measurements. This include numerical simulations, experimental tests of different types of fibre optic cables embedded in laboratory size concrete models and further optimisation and implementation on a real structure.
The project for ESR2 has three objectives:
- Assess the strain transfer mechanisms from the host or substrate material to the fiber optic by experimental test.
- Develop of a realistic model of the strain transfer in presence of cracks for proper evaluation of crack width.
- Implement fiber optic sensors on real concrete structure.
- Improvement of models for crack width measurements: combination of different mechanisms (debonding, slippage elasto-plastic and plastic phase of the coating deformation…).
- Lab investigations: quasi-static and fatigue tests on concrete samples of small dimensions with different types of embedded fiber optic.
- Comparative study with other types of sensors used for structural health monitoring (ESR1's project).
- Application on Ultra High Performance Fiber Reinforced Concrete UHPFRC (ESR5's project).
- GuD (Berlin, Germany)
November & December 2017, January 2018
Study of early damage detection capability DFOS compared to Coda Wave Interferrometry technique.
- Chapeleau X., Sedran T., Cottineau L-M., Cailliau J., Taillade F., Gueguen I., Henault J- M.
Study of ballastless track structure monitoring by distributed optical fiber sensors on a real scale mockup in laboratory
Engineering Structures 56, pp1751-1757, 2013
- Chapeleau X., Cottineau L-M., Sedran T., Brisson A., Kolodziejski S., Masson C., Cailliau J.
Monitoring of Temperature Gradient Effects on the Mechanical Behavior of a Real Ballastless Track Structure
International Workshop on Structural Health Monitoring, Stanford University, September 2015
- Waeytens J., Rosic B., Limongelli M.P., Charbonnel P.E., Merliot E., Siegert D., Chapeleau X., Vidal R., Le Corvec V., Cottineau L-M.
Comparison of model updating techniques using strain sensor outputs to detect damages in a 8 meters post-tensioned concrete beam
International Conference on Recent Advances in Rehabilitation and Sustainability of Structures, June 2015
- Bassil A., Niederleithinger E., Wang X., Kadoke D., Chapeleau X., Leduc D., Abraham O., Breithaupt M., Pötschke S.
Distributed Fiber Optic Sensors for multiple crack monitoring in reinforced concrete structures
IWSHM 2019, The 12th International Workshop on Structural Health Monitoring, Stanford, California, USA, 10-12 September 2019
- Abraham O., Niederleithinger E., Chapeleau X., Klikowicz P., Brühwiler E., Bassil A., Wang X., Chakraborty J., Bayane I., Leduc D., Salamak M., Katunin A., Sørensen J.D.
Addressing the need to monitor concrete fatigue with Non Destructive Testing: preliminary results of Infrastar European project
SMT and NDT-CE 2018 - Structural Materials Technology for Highways and Bridges (SMT) and the International Symposium on Non-Destructive Testing in Civil Engineering (NDT-CE), New Brunswick, New Jersey, USA, 27-29 August 2018
- Bassil A., Chapeleau X., Leduc D., Abraham O.
Quantification of cracks in reinforced concrete structures using distributed fibre optic sensors
EWSHM 2018, The 9th European Workshop on Structural Health Monitoring Series, Manchester, UK, 10-13 July 2018
- Sawicki B., Bassil A., Brühwiler E., Chapeleau x., Leduc D.
Detection and Measurement of Matrix Discontinuities in UHPFRC by Means of Distributed Fiber Optics Sensing
Sensors, Volume 20, Issue 14, July 2020
- Bassil A., Chapeleau X., Abraham O., Leduc D.
Concrete Crack Monitoring Using a Novel Strain Transfer Model for Distributed Fiber Optics Sensors
Sensors, Volume 20, Issue 8, April 2020
- Wang X., Chakraborty J., Bassil A., Niederleithinger X.
Detection of Multiple Cracks in Four-Point Bending Tests Using the Coda Wave Interferometry Method
Sensors, Volume 20, Issue 7, April 2020
- Bassil A., Wang X., Chapeleau X., Niederleithinger E., Abraham O., Leduc D.
Distributed Fiber Optics Sensing and Coda Wave Interferometry Techniques for Damage Monitoring in Concrete Structures
Sensors, Volume 19, Issue 2, January 2019
ESR 2: Antoine Bassil (Université Gustave Eiffel - Ifsttar)
Local academic supervisor: Dr Xavier Chapeleau (Université Gustave Eiffel - Ifsttar)
Industrial co-supervisor: Dr Fabian Kirsch (GuD)
PhD director: Dr Dominique Leduc (University of Nantes)
PhD co-director: Dr Odile Abraham (Université Gustave Eiffel - Ifsttar)